Home · The Plant
Engineered end to end.
From shredding scrap to spectrometry, every stage of the process runs under one roof in Tirana — with a 25,000-tonne annual production capacity.
From scrap to pure aluminium.
A wheel loader feeds raw scrap into the shredder, then the material is cleaned through magnets, eddy-current separation and an X-ray TOMRA sorter — which blows out copper, zinc, lead, stainless and opaque fractions, leaving high-purity aluminium ready to smelt.
How the metal flows.
A rotary decoater burns the coatings off the scrap, which is then melted in a graphite-pump vortex that loads the 50-ton holding furnace. From there the metal feeds the 20-ton furnace and, finally, the casting table for billets and slabs.
Strapped, labelled, shipped.
Finished billets, slabs and ingots are bundled, strapped and labelled, then loaded for dispatch to customers across the region.
Four stages, one site.
Raw material processing
Hammer-mill, twin-shaft and single-shaft shredders, magnets, eddy-current separation and an X-Ray TOMRA sorter deliver clean, sorted feedstock.
Smelting
Five smelting furnaces and one homogenising furnace, including a 2023 twin-chamber unit with regenerative and oxygen burners.
Casting
Billet and slab casting lines with a double-rotor degasser and modern filtration to minimise hydrogen and inclusions.
Laboratory
Every melt is verified on a Thermo Fisher ARL spectrometer before casting — quality assured, batch by batch.
Visit or verify.
Request a spec sheet, a sample or a plant introduction — we're happy to walk you through the process.
Contact the team